Used Set JBL Line Array PA System 8x Active VRX932 LAP - 4x Passive SRX728S Subwoofers

14,000.00
(17,360.00 inc tax)
PA System JBL VRX SRX
In stock
1 item(s)
+

Used JBL Set Line Array PA System 8x Active VRX932 LAP - 4x Passive SRX728S Subwoofers 

From Instalation

Set Includes:

  • 8 x VRX932LAP 
  • 4 x SRX728S 
  • 2 x VRX-AF Bumper

Specifications VRX932LAP:

  • Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
  • JBL's exclusive neodymium magned Differential Drive woofer for high-power capacity and light-weight.
  • VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
  • Constant Curvature waveguide for unprecedented array coherence.
  • Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
  • Array Configuration Selector permits "array shading".
  • Power Rating: 1750 Watts Peak; 875 Watts Continuous
  • Frequency Range: 57 Hz - 20 kHz (-10 dB)
  • Dimensions (H x W x D): 349 mm x 597 mm x 444 mm (13.75 in x 23.5 in x 17.5 in)
  • Frequency Response: 75 Hz - 20 Hz (+/-3db)
  • Maximum Peak Output: 136 dB SPL at 1m
  • Coverage Pattern: 100 x 15 nominal
  • DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance): LF: 750 Watts, HF: 125 Watts
  • DPC-2 Output Section: LF: Dual-Bridged Technology, Class D
  • Audio Input Connector: XLR with loop through
  • LF Driver: 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
  • HF Driver: 3 x JBL 2408J, 38 mm (1.5 in)
  • User Controls: Input Attenuator (0-16 dB)
  • Signal Processings: DSP based, resident in Input Module
  • AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60 Hz
  • AC Input Connector: Neutrik PowerCon (NAC 3MPA)
  • AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
  • AC Current Requirements: L 6A per system at 120V, 3A per system at 240V
  • Enclosure: 25/15 mm, 11-ply birch plywood
  • Suspension / Mounting: Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
  • Finish: Black DuraFlex finish
  • Grille: Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam
  • Net Weight: 24 kg (52 lb)

Specifications SRX728S:

  • Frequency Range (-10 dB): 27 Hz – 220 Hz
  • Frequency Response (±3 dB): 33 Hz – 220 Hz
  • Input Connection Modes: 
    • Switchable, +1/-1 or +2/-2
    • Internally selectable, Parallel or Discrete
  • Recommended Crossover Frequencies: 
    • 80 Hz, 24 dB / octave HPF
    • 80 Hz, 24 dB / octave LPF
  • Power Rating(Continuous1 / Program / Peak): Parallel: 1600 W / 3200 W / 6400 W
  • Maximum SPL2: 136 dB SPL peak
  • Sensitivity (1w @ 1m): 98 dB SPL
  • LF Driver: 2 x JBL 2268H 457 mm (18 in) Differential Drive woofer with neodymium-magnet and dual voice-coils
  • Nominal Impedance: 
    • Parallel: 4 ohms
    • Discrete: 8 ohms x 2
  • Active Tunings: dbx DriveRack, all models. 
  • Enclosure: Rectangular, 18 mm, 13-ply birch plywood
  • Finish: Black DuraFlex finish
  • Grille: Powder coated, black, 16-gauge perforated steel with
  • acoustical transparent charcoal foam backing.
  • Removable JBL badge and punched JBL logo.
  • Input Connectors: Neutrik® Speakon® NL-4 (x2)
  • Dimensions (H x W x D): 602 mm x 1067 mm x 838 mm
  • (23.7 in x 42 in x 33 in)
  • Net Weight: 76 kg (166.5 lb)

No posts found

Write a review